玻璃门安装方法：

Glass door installation method:

1、 定位、放线

1. Location and line

由固定玻璃和活动玻璃门扇组合玻璃门，统一进行放线定位，依据设计和施工图纸要求，放出玻璃门的定位线，同时确定门框位置。

The glass door is composed of fixed glass and movable glass door, and the location is placed uniformly. According to the requirements of design and construction drawings, the location line of the glass door is released, and the position of the doorframe is also determined.

2、 安装框顶部限位槽

2. The top limit slot of the top of the mounting frame

限位槽的宽应大于玻璃厚度二至四毫米,槽深为十至二十毫米。安装时，一开始由所弹中凡线引出两条金属装饰板边线，接着按边线进行门框顶部限位槽的安装，通过胶合垫板调整槽口内的槽深。

The width of the limit slot should be greater than the glass thickness of two to four millimeters, and the groove depth is ten to twenty millimeters. During installation, two metal decorative panels were drawn from the middle line of the projectile, then the installation of the top limiting slot on the doorframe was carried out according to the sideline, and the groove depth in the notch was adjusted through the gluing pad.

3、 安装金属饰面的木底托

3, the installation of metal decorative wood base

把方木固定在地面上，用万能胶把金属饰面板粘在木上。若采用铝合金方管，可以用铝角固定在框柱上，或用木螺钉固定在埋入地面中的木砖上。

The wood is fixed on the ground, with adhesive to metal panels bonded to the wood. If the Aluminum Alloy tube, can use aluminum angle is fixed on the frame column, or with wood screws fixed on the sunken in the grounds.